- It is the elevator used to lower the bleeding hooks from the high line to a height of about 2 meters at low speed.
- Hook lowering elevator hooks work with an inclination of approximately 40-45 degrees and is driven by a motor-reducer.
- The chassis of the hook lowering elevator is made of specially formed sheet metal and is hot-dip galvanized.
- Engine power is minimum 0.75 Kw.
- There is a guard around the pipe rail that prevents the hooks from falling.
| Drive | Motor-Reducer |
| Motor Power | 0,75 Kw |
| Slope | 40-45 ' |
| Length | approx. 4000mm |
